Parallel Flange Channel Previous Parallel Flange Channel

Discounted Shower Drains and Grates

From $85.00
In stock

Are you looking for the highest quality and most diversified range of stainless steel drains in Australia? Steel Builders sell a full range of stainless steel grates and drains.


Aqualuna Drains - Stainless Steel Grates and Drains

  • Grate top is made from 1.5mm - 304 stainless steel.
  • Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.
  • Our drain bases come with folds in base to allow water to flow directly to outlet.
  • Outlet is 50.8 OD. Outlet is in either the centre or end of the drain.
  • All drain bases are fully welded and made from 304 stainless steel.
  • DIY or customs do not have folds in the base towards the outlet which is weled onto the base.

When ordering, first choose your length. After choosing your length, then choose your width, pattern and outlets.

Various different lengths:

  • 600mm all the way up to 1800mm
  • We also have longer lengths available as well as custom lengths.

A range of different widths:

  • 70mm, 85mm, 100mm

Depending on the width, various Depths:

  • 22mm, 25mm, 30mm

Decorative and/or Tile Insert Types of drains: Product drawings can be found in the table below

Dimensions Heelguard Lines Square Brick Tile Insert
70mm wide x 22mm deep Drawing N/A Drawing N/A Drawing
85mm wide x 22mm deep Drawing Drawing Drawing Drawing N/A
100mm wide x 22mm deep Drawing Drawing N/A N/A  Drawing

*Tile Inserts in 100mm wide x 30mm deep

*Tile Inserts in 70mm wide x 25mm deep

Range of Outlet sizes, positions, DIY and custom:

Depending on the grate selected, you may have the option of

  • Centre Outlet – 50mm / 80mm Outlet in Centre of Drain
  • End Outlet - 50mm from the end to the centre of the drain
  • Custom Outlet – 38mm, 50mm, 76mm, 80mm, 95mm outlet options to be welded at the position you request
  • DIY – Buy the outlet loose and either weld or glue it in where you like

The advantages of our Stainless Steel Heelguard include:

  • 3mm Wedge Wire with 4mm Aperture
  • 5mm (x20mm deep) edge bar all the way around the grate - eliminating any sharp edges
  • Cross bars every 25mm, not touching base of drain the base of the drains allowing plenty of water flow
  • Tapered cross bars reduces the buildup of dirt & grime
  • Heel & Pet Friendly

304 Stainless Steel:

  • This product is made from 304 stainless steel which is recommended to be used internally.
  • 304 stainless steel is typically used in bathrooms, showers, laundries or any other internal use.

Manufacture & Delivery:

  • Stock: 99% of our stock is always available. If the item is not available, we will inform you immediately.
  • The lead time for shower grate modifications is approximately 3-5 days.
  • Following the manufacture of the grate we will either notify you of pickup or ship them out the following business day.
  • Delivery Costs: For delivery costs, please enter your suburb and post code on the cart page.
  • Approx Delivery Time : Sydney 1 day. Melbourne/Brisbane 2 days. Adelaide 3 days. Perth 5 days.
  • We do offer free pick up if you would like to pick up or organise your own transport.

How to Install Shower Drain:

  • Shower Drain Installation / VID
  • Shower Drain Installation - Timbre Flooring / PDF - JPG
  • Shower Drain Installation - Concrete Flooring / PDF - JPG

Can't find what you need? Get a custom quote MORE INFO
To Top