Smart Flat Bar™ - 85mm x 7mm Previous product

Galvanised Adjustable Steel Smart™ Telpost

From $220.00
SKU
TELPOST

Require support posts for an LVL steel beam but not sure of the height? Trying to support a roof load with a post and your concrete levels are not quite right? Take the stress out of getting steel posts just right with Smart Telpost™ by Steel Builders. Used to support either steel beams or timber beams in a huge range of applications, a Smart Telpost™ is ideal for supporting LVL’s over alfresco and balcony areas prior to brick piers being laid. Available in a range of sizes, our Smart Telpost™ are all off the shelf hot-dip galvanised products and can be used with any of our proprietary heads. For adjustable steel posts in Sydney, Steel Builders is the ideal choice. For a complete description, please download a Telpost brochure from our downloads page.

Features

    • Smart Telpost™ is designed to take the stress out of getting steel posts at just the right height and can be used to support either steel beams or timber beams in a huge range of applications. The Smart Telpost™ are adjustable from 1900mm-3300mm and are fully hot-dip galvanised to Australian Standards.
    • Simply select the type of head you require with the body and you are set to go.
    • Simply select the body (AP1) and one of our custom heads from the list below.
    • Smart Telpost™ comes complete with all bolts and locking nuts as shown in the photo, heads must be ordered separately if required.
  • Smart Telpost™ uses an M30 threaded rod at the base for mm adjustment and 3 x M16 structural bolts for 100mm adjustment through the body. The special bolts fit within a 90mm timber frame.

IMPORTANT: THE SMART TELPOST™ COMES WITH AN OPEN-TOP PRE-DRILLED TO SUIT OUR SMART TELPOST™ HEADS.  YOU MUST ORDER THE SUITABLE SMART TELPOST™ HEAD FROM THE LIST ALONG WITH THE SMART TELPOST™ BODY. ALL HEADS COME WITH THE CORRECT BOLTS TO FIT THEM TO THE BODY.

 

Smart Telpost™ Attachments:

  • AT1: Used for connection to an LVL or timber beam. (Suits tek or coach screws)
  • AT2: Used where two LVL's or timber beams join on a mitred corner. (Suits tek screws or coach screws)
  • AT3: Used where 2 universal steel beams or columns connect over the post. (Suits M16 bolts)
  • AT4: Used where 2 PFC's connect over the post. (Suits M16 bolts)
  • AT5: Used for supporting one end of a universal beam or column. (Suits M16 bolts.)
  • AT6: Used for supporting one end of a PFC. AT6 is shorter than AT7 to avoid conflict with cornice. (Suits M16 bolts.)
  • AT7: Used for supporting one end of a PFC. Suits M16 bolts. AT7 is longer than AT6 so cannot be used where it may interfere with cornice
  • AT8: Dual connection for picking up an LVL or PFC. Especially good for alfresco areas where beam allocation may change. (Suits M16 bolts, tek screws or coach screws)
  • AT9: Used where 2 LVL's connect in a straight line.

Stock & Delivery:

  • Stock: 99% of our stock is always available. If the item is not available, we will inform you immediately.
  • Delivery Costs: For delivery costs, please enter your suburb and postcode on the cart page.
  • We aim to deliver lintel orders within Sydney Metro the next business day on a Ute or Hiab Truck.
  • Orders outside Sydney metro should be expected 1 to 2 days later.
  • Unfortunately, at present, we only deliver lintels to Sydney and selected areas in NSW.
  • Enter your postcode in the cart to find out if we deliver to your area.
  • We do offer free pick up if you would like to pick up or organise your own transport. **NOTE: We will notify you when your order is ready for collection

Can't find what you need? Get a custom quote MORE INFO
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
To Top