Galvanised Steel Lintels - Render Previous product

Galvanised Steel Lintels

Galvanised Steel Lintels - Hot Dip Galvanised Steel Angles for supporting brickwork. Available in various lengths
From $20.97
In stock
SKU
bb
Bestseller

Galvanised Lintels- Galvanised light weight lintels to support brickwork structure openings.

Features are:

  • Hot Dip Galvanised to AS/NZ 4680:2006
  • R3 Durability Rating in accordance with AS/NZS 2699:2002
  • Light weight when compared to traditional Concrete/Brick Lintels
  • Available in a range of sizes.

Section Properties

 DIMENSIONS    SECTION PROPERTIES            
  Mass per Metre  Gross Section Area About x-axis   About y-axis   About n-axis About p-axis
Designation     Ag Ix Zx  Iy Zy  In Ip
  kg/m   mm^2 10^6 mm^4 10^3 mm^3 10^6 mm^4  10^3 mm^3  10^6 mm^4  10^6 mm^4
100 x 100 x 6 B-Bar 8.19 1164  1.83 25.84  0.46 11.97 1.14  1.14
150 x 100 x 6 B-bar  10.53   1464 4.05  39.4  0.72 13.39 3.49 1.29 

Buda B-bar 100 x 100 x 6.0 - Safe load Table

 Angle  Span (mm)  900  1200  1500  1800  2100  2400  2700
 100 x 100 x 6.0  Bar Length(mm)  1200  1500  1800  2100  2400  2700 3000 
 9.42kg/m  UDL (kg/m)  2550  1520  995  601  390  260  182
   Point Load(kg)  1350  1035  805  655  535  415  325

Buda B-bar 150 x 100 x 6.0 - Safe load Table

 Angle  Span (mm)  1800  2100  2400  2700  3000  3300  3600  4000
 150 x 100 x 6.0 Bar Length(mm)   2100  2400  2700  3000  3300  3600  3900  4300
 11.78kg/m  UDL (kg/m)  1320  945  705  525  375  275  210  155
   Point Load(kg)  1301  1050  875  758  645  555  495 415 

 Note:

  1. a minimum of three courses of bricks must be laid above the lintel beam.
  2. Load limited by deflection of 1/600 span.
  3. Yielding stress fy=235 Mpa, tensile strength fu=375Mpa for both legs
  4. Calculate bar length is span+150mm each end.

Notes on Safe Load Tables for Budabar B Bars

The Buda B and R bars are imported from China, material used is Q235B, and here Q stands for yielding.
According to PRC National Standard GB700-88(previous version GB700-79 part A3 & C3), the minimum yielding point is 235Mpa for thicknesses less than 17mm, tensile strength is between 375-400MPa.

  • The B and R bars are simply supported at both ends.
  • The B and R bars loaded such that the load acts vertically and equally on both sides of the web.
  • Loads given are total (allowable) loads including lintel and brickwork.
  • UDL loads are constant along the length of the bar.
  • Point loads act at mid-span.
  • 150mm minimum bearing support on to brickwork.
  • Hot-dip galvanising to AS / NZS 4680:2006.
  • Loads are in accordance with AS / NZS 1170.1:2002.

Stock & Delivery:

  • Stock: 99% of our stock is always available. If the item is not available, we will inform you immediately.
  • Delivery Costs: For delivery costs, please enter your suburb and post code on the cart page.
  • We aim to deliver lintel orders within Sydney Metro the next business day on a Ute or Hiab Truck.
  • Orders outside Sydney metro should be expected 1 to 2 days later.
  • Unfortunately at present we only deliver lintels to Sydney and selected areas in NSW.
  • Enter your post code in the cart to find out if we deliver to your area.
  • We do offer free pick up if you would like to pick up or organise your own transport.

To Top