Heelguard Stainless Steel Shower Grate & Drain - 70 x 22mm

Aqualuna Drains - Stainless Steel Grates and Drains

• Grate top is made from 1.5mm - 304 stainless steel.
• Our Heelguard pattern grates are made from 3mm Wedge Wire welded with cross braces and full edge bars around the perimetre.
• Our drain bases come with folds in base to allow water to flow directly to outlet.
• Outlet is 50.8 OD. Outlet is in either the centre or end of the drain.
• All drain bases are fully welded and made from 304 stainless steel.
• DIY or customs do not have folds in the base towards the outlet which is weled onto the base.
• This is an Internal Shower Grate.
• Proudly Australian Designed and made to Australian Standards.

When ordering, first choose your length. After choosing your length, then choose your width, pattern and outlets.

Various different lengths:

• 600mm all the way up to 1800mm
• We also have longer lengths available as well as custom lengths.

A range of different widths:

• 70mm, 85mm, 100mm

Depending on the width, various Depths:

• 22mm, 25mm, 30mm

*Tile Inserts in 100mm wide x 30mm deep

*Tile Inserts in 70mm wide x 25mm deep

Range of Outlet sizes, positions, DIY and custom:

Depending on the grate selected, you may have the option of

• Centre Outlet:50mm / 80mm Outlet in Centre of Drain
• End Outlet - 50mm from the end to the centre of the drain
• Custom Outlet: 38mm, 50mm, 76mm, 80mm, 95mm outlet options to be welded at the position you request
• DIY: Buy the outlet loose and either weld or glue it in where you like